|
- Make a Selection
or Scroll Down -
Taurus 2 Ring
Saw
 |
Powerful Professional
Saw
Ridged non-flex ring blade provides more control
than any bandsaw, cuts in any direction and grinds as it cuts. |
|
Taurus
3 Ring Saw
 |
Top Professional
Diamond Ring Saw
Convertible to hand-held saw, improved
low-maintenance drive system, larger work surface, face shield
and built-in light |
|
|
|
Go to
top of Page
Return to Previous
Section
|
|
Click
for Large Pictures
Special Salel!
 Video
See the Saw in action!
Saw is removable from case
for
hand scroll work.
Click
for Large Pictures
Special
On-Line Salel!
|
Taurus 3 Ring Saw
Diamond Ring Saw for Glass,
Tile, Light Stone
New Saws in
Boxes Sealed from the Factory
- Cuts All
Types of Glass
- Cuts Ceramic
Tile, Plastic, & Stone
- The Ring
Blade Cuts in All Directions
- Ridged Blade
Has Outstanding Control
- Grinds as
it Cuts - No Sharp Edges
- Blades Last
Longer than Bandsaws
|
Taurus 3 - New Features
- Hand-Held
Option for Hand Scroll Work
- Large 18"
x 16" Work Surface
- Improved
Drive System - Less Maintenance
- Blade Stabilizer
for exacting control
- Built-In
Light Illuminates Cutting Surface
- Build-In
Face Shield for Added Safety
- Uses Same
5-/4" Ring Blades as Taurus 2
- Includes
DVD Usage & Instruction Video
- Optional
Heavy-Duty 'Mega Blade' Designed
for Thick Plate Glass, Tile and Stone
|
The Taurus 3 Diamond Ring Saw
is a professional level diamond ring saw! The unusual 5-3/4"
ring blade has diamonds on all sides (not just on the front of
the blade) so the blade cuts in any direction. And the
stainless steel ring blade is ridged, so it doesn't 'flex' or
'float' like bandsaw blades. The Saw saw has a powerful
1/5 horse power motor.
Saw has a convenient opening
side housing for easy access to blade, belt and motor. The
large 18" x 12" work surface can easily be removed
for cleaning. Includes a standard 5-3/4" diamond
blade and DVD instruction video.
The saw also has a hand-held
feature, that allows you to remove motor saw unit from the saw
case for hand scroll work. Improved heavy-duty drive system
provides reduced maintenance. Saw has an oversized 18"
x 12" work surface, flip-up face shield and built-in light
system. The unit comes with a standard ring blade mounted
on the saw. An optional 'Mega Blade' exclusively for the
Taurus 3, is super heavy-duty - designed specifically for thick
plate glass, tile and stone. An optional Snap-Apart blade
is also available for inserting the blade into a drilled hole,
to allow cutting without side entry cuts.
These
Saws are brand new, from the factory.
They are
NOT re-manufactured or referbished.
If
you've never used a Ring Saw, you will be amazed!
|
|
Case Size: 18" wide x 16" deep |
|
|
|
Work Surface: 17-3/4" x 16" |
|
|
|
Weight: 14 lbs. |
|
|
|
Motor: 1/5 hp, 110 vac, 1.3 Amps, single speed |
|
|
|
Blade: 5-3/4" stainless steel ring |
|
|
|
Lubrication: Water Pick-up, 6 liter reservoir |
|
|
|
Throat Depth: 5-5/8" Throat
Height: 1-1/2" |
|
|
|
Upper Blade Guide Height: 1-1/2" |
|
|
|
Warranty: Three Years (excl. blade/wear parts) |
|
|
|
Shipping Weight: 18 Lbs. |
|
Price: $639.00!
SAVE
TL-450 Taurus 3
Diamond Ring Saw .................................. 639.00
Brand
New Saws - In Stock & Ready To Ship!
Add
to Shopping Cart? Quantity:
Scroll
Down for Saw Accessories
|
|
|
|
|
|
Go to top of Page
Return to Previous Section
|
|
 |
Taurus 3 Accessory Kit
The Accessory Kit adds increased
versatility to the saw.
The kit includes a straight-edge
guide, 30-45-60 degree triangle cutting guides, bevel edge 45
degree edge guide (for 45 degree lamp edges and box corners)
30 degree bevel edge lamp wedge (for 30 degree lamp edges), and
a circle guide for cutting circles up to 15" in diameter.
TL-449 Taurus 3 Accessory
Kit ........................................... 39.95
Scroll
Down for More Taurus Accessories
|
|
|
Go to top of Page
Return to Previous Section
|
|
Separating
Ring Blade
Allows inserting blade
into
drilled hole!
|
Taurus 3 Ring Saw Blades
Taurus 3 diamond ring saw blades
are 5-3/4" in diameter diamond coated ring blades. The
standard Taurus diamond ring saw blade is .070"/80 grit
for use on glass, tile and stone. All Taurus 3 ring saw
blades include replacement grommets (2 orange grommets in each
blade pack).
The separating 'snap-apart' .070"/80
blade allows you to insert the blade into a drilled hole.
This lets you cut a piece out of the middle of material without
having an 'entry-cut' from the edge.
The heavy-duty 'Mega Blade' is
designed specifically for the Taurus 3 saw for improved cutting
of fused glass, thick plate glass, ceramic tile, porcelain tile,
and stone tile. The Mega Blad has a tear drop shape with
the point facing inward.
The Slim "jeweler's"
blade is .050"/80 grit is designed for very detailed, fine
cutting work. The slim blade thickness of .050" is
about 30% thinner than the standard ring blades.
The Slim/Fine 'Dichro' blade
is .050"/120 grit is designed for intricate work with less
waste and very fine grit for less chipping. It is intended
for use on dichroic glass, irridescent glass, jewlery, etc.
The heavy-duty 'Speed Blade'
is designed for aggressive cutting of fused glass, thick plate
glass, ceramic tile, porcelain tile, and stone tile. The
Speed Blade is the "inverted Mega Blade" with the point
of the tear drop shape facing outward. This blade includes
the flocked belt, as the standard belt will not handle the blades
sharp tip.
The Slicer Blade is .040"/100
grit is a flat blade that is designed for repeated foward and
backward cutting. The blade is designed for use with the
'Super Slicer' attachment. It is also recommended that
the flocked belt be used with this blade.
Note: The Taurus 2 and
Taurus 3 ring saw blades are interchangeable, with two exceptions.
While the Standard, Slim and Snap-apart blades are exactly the
same for both saw models, the replacement grommets included with
the blade pack differ for the Taurus 2 and Taurus 3 style blade
pack. Also, the heavy-duty 'Mega Blade', 'Speed Blade',
and 'Slicer Blade' are only available for the Taurus 3 model
ring saw and will not fit on the Taurus 2 model saw.
Mix any quantity of 3 or more
Taurus blades for lower price. Be sure to use the "Mix"
price buttons. If an incorrect price button is used for
the quantity purchased, the price will be adjusted appropriately
when the order is processed.
Taurus 3 Diamond Ring Saw Blades:
TL-443 Standard
Ring Saw Blade - Taurus 3 ..... ea 89.75 / 3+ 85.95
SAVE!
-Regular List Price $99.95
|
|
|
TL-447 Separating,
'snap-apart' Blade - Tarus
3 ..ea 89.75 / 3+ 85.95
SAVE!
-Regular List Price $99.95
|
|
|
TL-436 Mega Ring
Saw Blade - Taurus 3 ...... each 99.75 / 3+ 95.95
SAVE!
-Regular List Price $109.95
|
|
|
TL-440 Slim Jeweler's
Blade - Tarus 3 .......... each 89.75 / 3+ 85.95
SAVE!
-Regular List Price $99.95
|
|
|
TL-435 Slim/Fine
'Dichro' Blade - Taurus 3 ...... each 99.75 / 3+ 95.95
SAVE!
-Regular List Price $109.95
|
|
|
TL-438 Speed
Blade w/Flocked Belt - Taurus3 . ea 139.75 / 3+ 135.95
SAVE!
-Regular List Price $149
|
|
|
TL-439 Slicer
Blade - Tarus 3 ..................... each 99.75 /
3+ 95.95
SAVE!
-Regular List Price $109.95
|
|
|
MORE
Taurus Accessories - Scroll Down
|
|
|
Go to top of Page
Return to Previous Section
|
|
On-Line
Special
Click for Large Pictures
Click
for Large Pictures
|
Taurus 2 Ring
Saw
Sorry
- Discontinued by Manufacturer
(Blades
& Parts are Available Below)
|
- Cuts All
Types of Glass
- Cuts Ceramic
Tile, Plastic & Stone
- Ring Blade
Cuts in All Directions
- Blades Last
Longer
- Grinds as
it Cuts
|
A professional level diamond
ring saw at a price everyone can afford. The unique 5-3/4"
ring blade has diamonds on all sides (not just on the front)
so the blade cuts in any direction. Plus the stainless
steel ring blade is ridged and doesn't 'flex' or 'float' like
bandsaw blades. Powerful 1/5 horse power motor. Saw
has convenient snap-open side housing for easy access to blade,
belt and motor. Large 16" x 10" work surface
is easily removed for cleaning. Includes standard 5-3/4"
diamond blade. Optional Snap-Apart diamond ring saw blade
is also available for inserting blade into a drilled hole to
allow cutting without side entry cuts.
The Taurus 2 Saw was discontinued
by the manufacturer, Gemini Saw Company, after the introduction
of the Taurus 3 Ring Saw. The Taurus II saw was a great saw,
however, the new Taurus 3 model had many improvements.
The T-3 model saw added a much more heavy-duty, low maitenance
drive system in addition to a larger work surface, blade stabilizer,
built-in work light, etc.
The Taurus II specifications
are shown below for reference purposes. Taurus II blades,
parts and accessories, are also listed below.
We continue to sell Taurus
II parts and accessories in support of the large number of our
customers who have Taurus II model Saws.
Taurus
2 Specifications
|
|
Case Size: 18" wide x 10" deep |
|
|
|
Table Size: 16" wide x 10" deep |
|
|
|
Weight: 12 lbs. |
|
|
|
Motor: 1/5 hp, 115 vac, single speed |
|
|
|
Blade: 5-3/4" stainless steel ring |
|
|
|
Lubrication: Water Pick-up, 6 liter reservoir |
|
|
|
Throat Depth: 5-1/2" Throat
Height: 1-1/4" |
|
|
|
Upper Blade Guide Height: 1-1/4" |
|
|
|
Warranty: Two Years (excl. blade) |
|
Scroll
Down for Taurus 2 Parts & Accessories
|
|
|
|
|
|
Go to top of Page
Return to Previous Section
|
|
|
Taurus II
Accessory Kit
Accessory Kit for the Taurus
II diamond ring saw adds increased versatility to the powerful
saw. Kit includes face shield, spot light, straight-edge
guide, 10 degree and 45 degree miter guides (for lamp edges and
box corners), 30-60-90 degree cut-off triangle guides, and circle
guide (up to 15-3/4" diameter circles). An instruction
video is also included covering use of the accessory kit items,
plus it has a section on using the optional "separating
blade". The light and face shield are also available
separately, below.
Out of Stock - Backorders
Not Available
TL-429 Taurus II Accessory
Kit ........................................ 49.95
Taurus
Model 3 Accessory Kit - Scroll Up
|
|
Go to
top of Page
Return to Previous
Section
|
|
Separating Ring Blade
Allows inserting
blade
into drilled hole!
|
Taurus 2 Diamond Ring
Blades
Taurus II diamond ring saw blades
are 5-3/4" in diameter diamond coated blades. The
standard diamond ring blade is .070"/80 grit for use on
glass, tile and stone. All Taurus 2 ring saw blades include
replacement grommets (3 yellow & 4 red grommets in each blade
pack).
The Slim "jeweler's"
blade is .050"/80 grit is designed for very detailed, fine
cutting work. The slim blade thickness of .050" is
about 30% thinner than the standard Taurus ring blades.
The separating 'snap-apart' blade
allows you to insert the blade into a drilled hole. This
lets you cut a piece out of the middle of material without having
an 'entry-cut' from the edge.
Note: The Taurus 2 and
Taurus 3 ring saw blades are interchangeable, with two exceptions.
While the Standard, Slim and Snap-apart blades are exactly the
same for both saw models, the replacement grommets included with
the blade pack differ for the Taurus 2 and Taurus 3 style blade
pack. Also, the heavy-duty 'Mega Blade' is only available
for, the Taurus 3 model ring saw and will only fit on that model
saw.
Mix any quantity of 3 or more
Taurus blades for lower price. Be sure to use the "Mix"
price buttons. If an incorrect price button is used for
the quantity purchased, the price will be adjusted appropriately
when the order is processed.
Taurus 2 Diamond Saw Blades
TL-421 Standard
Ring Blade - Tarus 2 ..... ea 89.75 / 3+ 85.95
SAVE!
-Regular List Price $99.95
|
|
|
TL-430 Slim Jeweler's
Blade - Taurus 2 ............. ea 89.75 / 3+ 85.95
SAVE!
-Regular List Price $99.95
|
|
|
TL-432 Separating,
'snap-apart' Ring Blade .. ea 89.75 / 3+ 85.95
SAVE!
-Regular List Price $99.95
|
|
|
MORE
Taurus Accessories - Scroll Down
|
|
|
© |
Copyright Diamond
Drill Bit & Tool 1998-2021.
All website content, images, pictures, graphics, design,
wording and scripts, are the exclusive registered
property of Diamond Drill Bit & Tool. See Copyright Information |
Site
Index | Contact
Us |
Privacy
. |
|